Sor Single Point RF Level Switch Bedienungsanleitung PDF herunterladen (Seite 10)

10/16

Form 759 (03.13) SOR Inc.

Instructions for EMC

651K9

When subjected to an RF Interference, the

651K9 will maintain the +1% accuracy in

all frequency ranges. In order to achieve

the stated accuracy for the 651K9, a

shielded cable, cable gland, shield bead

and the probe should be mounted in a

metallic vessel. SOR recommends using

a shielded cable made of PVC

Insulation around a tinned copper braid

shield (Olflex CY cable or equivalent).

Refer to illustrations for installation of

shield bead onto the probe wire.

Short/Fat Bead

Certificate Number: IECEx BAS 05.0054X, Issue 2

Standards: IEC 60079-0:2011, Ed 6 and IEC 60079-11:2011, Ed 6

Listing: Ex ib IIB Tx Gb (-40°C < Ta < +80°C)

Certificate Number: Baseefa 12ATEX0084X

Standards: IEC 60079-0:2011, Ed 6 and EN60079-11:2012

Condition of Safe Use: This apparatus may not be capable of

withstanding the insulation test required by Clause 6.4.12 of

IEC 60079-11:1999. This must be taken into account when installing the apparatus.

To order a new circuit board assembly, use the following part number:

99-414

Spare Parts

Instructions for IEC-Listed Product

Parameters: Ui = 28V

Ii = 100mA

Pi = 0.75W

Li = 0

Ci = 0

NOTE: Replacement of circuit boards not allowed on agency listed units.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Sor Single Point RF Level Switch Bedienungsanleitung Seite 10